Q-RACK Outdoor Exposure Racks
Q-RACK outdoor exposure rack kits are available in two types: direct exposure and under glass exposure.  See LR-3001 - Q-RACK Brochure for photos and more detailed information.

In direct exposure racks, specimens are directly exposed to the environment.  It is the most common method for testing coatings, inks, plastics, or finishes used outdoors.  Most typical test specimens can be easily mounted on a Q-RACK direct exposure system.  Our direct exposure rack kits meet the requirements of ISO 877-2 Method A, ASTM G7, ASTM D4141, or SAE J1976.  Be sure to visit our Standards Page for other information about relevant standards for Q-RACK systems or our other products and services.

Under glass exposure racks are primarily used to test automotive interior materials.  Specimens are exposed to sunlight behind special glass panels.

Direct Exposure Rack Kits:

• FL-3049-K     Welded Frame Direct Exposure Rack Kit  – North America Shipment Only
• FL-3055-K     Knock Down Frame Direct Exposure Rack Kit – Available for Shipment Globally
• FL-3120-K     Black Box Direct Exposure Rack Kit – North America Shipment Only

Under Glass Exposure Rack Kits:

• FL-3086-K     Under Glass Exposure Rack Kit – North America Shipment Only
• FL-3121-K     Black Box Under Glass Exposure Rack Kit  – North America Shipment Only

Q-RACK Direct Exposure Rack Kits
Q-RACK direct exposure rack systems feature two legs and an anodized aluminum main frame measuring 3.66 x 1.68 x 0.10m. Both welded frames and unassembled “knock-down” frames are available, depending on your shipping location.  Panel base and flap assemblies hold panels in place and may be adjusted to fit various sizes of test specimens. Q-RACK direct exposure rack kits have one panel base and five panel flaps; additional panel assemblies may be ordered to hold more specimens.

Sturdy positioning arms are used to hold frames securely at the correct angle of exposure (see Accessories). Sold in pairs, they are available for positioning the Q-RACK system at either: 0º (horizontal), 5º, 45º or 90º (vertical), to meet your testing specifications.

Other accessories include sub-frame kits (set of 8), additional rack components, test panels, and a black box retrofit kit.

Q-RACK Under Glass Exposure Rack Kits
Q-RACK under glass exposure rack systems feature two legs and a special welded, anodized aluminum main frame measuring 3.66 x 1.68 x 0.10m. Six sub-frames are provided, each covered with special 3 mm window glass.  All mounting hardware is supplied to hold test specimens in place.  Sturdy positioning arms are used to hold frames securely at the correct angle of exposure (see Accessories).  Sold in pairs, they are available for positioning the Q-RACK system at either: 0º (horizontal), 5º, 45º or 90º (vertical), to meet your testing specifications.

A black box under glass exposure kit also is available. With its aluminum black box, the rack kit is suitable for testing indoor materials under higher temperature conditions.

Q-RACK Accessories
Q-Lab offers several accessories for Q-RACK exposure rack kits, which are all available for shipment globally.  See LR-3001 - Q-RACK Brochure for photos and more detailed information.

Positioning Arms (Sold in Pairs) - required for installation of Q-RACK kits. Select the angle of exposure:

• FL-3071-K    0° Positioning Arms
• FL-3033-K    5° Positioning Arms
• FL-3032-K    45° Positioning Arms
• FL-3126-K    90° Positioning Arms

Panel Flap Assembly (Part FL-3009-K)
The panel flap holds the test panels in place.  It is easy to open and close.  You can increase the Q-RACK kit's sample mounting capacity by using additional panel flaps.  A vinyl strip separates the exposed and unexposed areas of each panel.

Panel Base Assembly (Part FL-3060-K)
Fits the bottom edge of every rack that uses panel flaps, holding the bottom of the panels in place.

Leg (Part FL-3072-X)
Individual legs may be purchased for custom installations.

Black Box Retrofit Kit (Part FL-3091-K)
Includes all the components and hardware to convert your Q-RACK frame into a black box exposure system.

Sub-Frame Kits
Used to modify the Q-RACK system to hold non-standard test specimens. Sub-frame kits include eight 81.25cm x 89cm open back sub frame assemblies, or six under glass sub-frame assemblies. Kits are easy to install and adjust for different specimen sizes.

• FL-3106-K   Sub-Frame Kit/Open Rack
• FL-3113-K   Sub-Frame Kit/Under Glass – North America Shipment Only

Offset Panel Holder Kits
Used to mount test specimens at an angle, to prevent water from dripping on the sample below.  They are adjustable for different sample widths and are available in two sizes.

• FL-3110-K   15.25cm Offset Panel Holder Kit - holds 40 specimens 
• FL-3111-K   20.30cm Offset Panel Holder Kit - holds 28 specimens